We offer a 30 Day Trial of the WARP 10® and if you are not fully satisfied we will refund your money. We can do this because these units are virtually never returned as opposed to other brands. (Refund does not include return shipping.)

About the Quantum WARP 75® Light

The innovative WARP 75 is brought to you by Quantum Devices, Inc. (QDI); the company that invented HEALS® (High Emissivity Aluminiferous Luminescent Substrate), solid-state lighting systems for NASA that have become the gold standards for photobiomodulation (PBMT) research and agriculture research.

The WARP 75 features a wider LED treatment area; 7.5 times larger than the original WARP 10. The total radiant area of the device is 75 cm2 producing a total fluence of 4.5 Watts. It is a high intensity, LED (light emitting diode) unit, intended for the treatment of chronic pain by emitting energy in the near-infrared (near-IR) spectrum. This infared therapy provides temporary minor muscle and joint pain relief, arthritis and muscle spasms; and relieving stiffness, promoting relaxation of muscle tissue and temporarily increasing local blood circulation, where applied.

Quantum WARP 75 Features:

High intensity 50 mW/cm2 illuminated surface produces 4 Joules/cm2 dose in 88 seconds
Large 75 cm2 treatment area
Dose accuracy controlled by an electronic timing circuit (timer) with audible end of cycle alarm
Remains cool to the touch
Easy to operate with one hand
Mounted to articulated arm (upon request)
Certified wavelength (670 nm) and power output • AC power

The WARP 75 is a larger and more powerful version of the WARP 10. System controls are located on the top panel for easy light dose delivery. Placement is directly against the skin where treatment is to occur.

Light Source of Choice:
Originally developed under a contract for the Defense Advanced Research Projects Agency (DARPA) by QDI, the pioneers of the NASA HEALS® technology, the WARP 10 was designed to assist armed forces personnel on the front lines.

infared graphs showing spectral power and spectral output in wavelength

The WARP 75® Difference:

The WARP 75 produces 50mW/cm2 of photon flux (power) in the near-infrared portion of the electromagnetic spectrum. 650nm-950nm is defined as the wellness spectrum. The figure above illustrates that the WARP 75 will produce 80 times more photon energy than a 250 Watt heat lamp or 6.4 times more photon energy than the Solar “Air Mass 1.5 Standard”.

Quantum Devices, Inc. has provided the HEALS® LED light sources for the research team at the Medical College of Wisconsin (MCW). Our highest radiant power output device, affectionately named the PHOTON CANNON, produced a radiant power output of 10,000 W/m2 (1 W/cm2) into a 30 mm diameter, stainless steel aperture, resulting in a total irradiance of 7.06 W. The WARP 75’s radiant power output of 4.5 watts is the highest radiant output of any LED device in today’s marketplace.

WARP 75® Dimensions:
	LED Head: 5.9in x 3.9in x 2.3in (149mm x 99mm x 59mm) Weight: 1.48 pounds (680 gms) External Power Supply: 5.2in x 3.0in x 1.4in (131mm x 77mm x 35mm) Weight: 1 pound (454 gms) Power Requirements, per WARP 75: 24 volt DC External Power Supply: 100-240 VAC ~ 50/60HZ, 1.75 A Environmental Specifications: Operating Temp: 50° to 104° F / 10° to 40° C Storage Temp: -22° to 131° F / -30° to 55° C Relative Humidity: 10% to 95% Non-condensing, for Storage 15% to 95% Operating, Non- condensing
Quantum WARP Light Devices

Home | Resources | Quantum WARP Products | Contact Us
All rights reserved. No part of this web site may be downloaded, reproduced, stored in a retrieval system, distributed or transmitted in any form by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of JNME, LLC.

We Accept:

Quantum WARP Light Devices is a division of JNME, LLC